 |
Our Flake Options
Custom Flake Chip Options
Custom colors come with custom color flake chips
(up to 3 colors)
|
Our Standard epoxy garage floor coating kits include enough flake chips for a light flake density.
( Our Full Kits include 1.5 lbs. Half Kits include 3/4 lb. )
|
Note:
- Light density requires 2 lbs. per 1,000 sq ft.
- Medium density requires 5-10 lbs. per 1,000 sq ft.
- Heavy density requires 20-30 lbs. per 1,000 sq ft.
- Rejection density requires 150 lbs. per 1,000 sq ft.
|
If you choose the fine flakes the amounts need to be doubled to achieve the right density.
The flake density photos below LIGHT, MEDIUM and HEAVY represent our 1/4" (standard) flakes.
|
The flake density photo below FLAKE TO REJECTION is shown with our 1/4" (standard) flakes. Flake to Rejection is when the floor is totally saturated with flakes.
|
|
The FINE is shown with our 1/16" (fine) flakes. When ordering you will have the option of selecting either the Standard or Fine flakes included in our complete coating kits.
|
|
Due to the many variables in computer monitor settings the sample colors shown below may not be accurate and should only be used as a reference. Actual Epoxy-Coat™ samples will provide the best guide for final color selection and are available upon request from Epoxy-Coating™ Inc.
|
|
